STAS Cobra with steel cable (for loads up to 44 lbs)
Product Code: SC101
Our Price: $8.30
Description
Thanks to the patented cobra there is no longer any need to slide the cord onto the rail; it can simply be hooked on wherever you choose. Choose your cable length ranging from 39 3/8" to 118". The galvanized steel cable is suitable for hanging heavier wall decorations, the zipper hook in conjunction with this steel cable will bear weights up to 44 lbs. Balance larger frames or distribute the weight of heavier frames by using two cables and two hooks. Compatible with most picture hanging rails that have a bottom open channel.
Product includes one cable. For bulk packet of 20 steel cables 59" click here.
Features
- Each cable uses braided steel of 1 /12"(2 mm) in diameter. Each cable length is accurately measured and spliced then soldered at the end to keep the cable from unraveling. We recommend ordering the cables to the length desired or longer than desired and wrapping the excess length together and tucking it under the artwork.
In the event that cutting is necessary follow these easy steps:
1. Measure the desired length.
2. Tightly wind a piece of thin tape around the area to be cut. (Scotch brand 810 transparent tape works well). Make sure that it is placed in the center of the area to be cut.
3. Use a Klein hand cable cutter or similar and cut.
4. (Optional) Apply solder at the tip. Soldering must be clean and not exceed the diameter of the cable.
5. Remove tape(after optional soldering)